| FEATURES |
Flexibel Markeersysteem, uitermate geschikt voor het markeren van grote of meerdere kleine artikelen |
Rapid, On-Line |
TMP3200
Cost Effective |
TMP3200E
Benchtop or On-line Marking. Electromechanic pin requires no air. |
Heavy-Duty, Large |
High Speed Hand-Held Marking or Fixtured Applications with Severe Spatial Constraints |
Hand-Held Marking or Fixtured Applications with Severe Spatial Constraints |
Fixtured Applications in Extremely Wet or Dirty Environments |
Extremely Cost-Effective On-line, High Speed Marking |
8-Pin Marking Head for Extremely High Speed On-Line Applications |
Nearly Silent |
Nearly Silent |
Stand-Alone Benchtop Application |
Stand-Alone |
| Tekeningen van het Markeersysteem |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Besturingskast |
|
|
TMC090 |
|
|
|
|
TMC090 |
|
|
|
|
|
|
| Toepasbaar
voor Draagbare Applicaties |
|
|
|
|
Ja |
|
|
|
|
Ja | ||||
| Markeerdiepte (Gebaseerd op 53HRC Materiaalhardheid) |
(.03-.33mm) |
(.03-.33mm) |
(.03-.33mm) |
(.03-.25mm) |
(.03-.56mm) |
(.03-.25mm) |
(.03-.33mm) |
(.03-.33mm) |
(.03-.33mm) |
(.03-.25mm) |
|
|
(.03-.25mm) |
(.03-.25mm) |
|
Geluidsniveau |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Computer Required |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Markeersnelheid - MAX |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Maximaal Markeerraam (Bereik) |
(152 x 304mm) |
(16 x 114mm) |
(100 x 150mm) |
(100 x 150mm) |
(413cm2) |
(13 x 50mm) |
(13mm) |
(13 x 50mm) |
(38.1mm) |
(12.7mm) |
(100mm) |
(63.5mm) |
(100mm) |
(25 x 100mm) |
| Karakterhoogte |
(152mm) |
(16mm) |
(50mm) |
(50mm) |
(44.5mm) |
(13mm) |
(13mm) |
(13mm) |
(38.1mm) |
(12.7mm) |
(100mm) |
(63.5mm) |
(100mm) |
(25mm) |
| Programmeerbare Z- As |
|
|
|
|
|
|
||||||||
| Maximaal Aantale Markeerpinnen |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Markeren van Meerdere Tekstlijnen |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Boogtekst |
|
|
|
Software |
|
|
|
|
|
|
|
|
|
|
| Continuous Characters |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Logos |
|
Software. |
SW/Ja |
SW |
Software |
Software |
Software |
Software |
Software/Ja |
Software |
Software |
Software |
Software |
Software |
| Markeren van Continue Gevormde Karakters |
|
|
|
|
|
|
|
|
|
|
|
|||
| Automatische Serienummers |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Datumcodes |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Markeren op onregelmatig gevormde oppervlaktes |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Aantal Aanwezige Standaard Fonts |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Mogelijkheid tot Speciaal Gedefineerde Fonts |
Software |
Software |
Software |
Software |
Software |
Software |
Software |
Software |
Software |
Software |
Software |
Software |
Software |
Software |
| Host Interface/Aansluiting op het Netwerk |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Resolutie |
(79 d/cm) |
(79 d/cm) |
(79 d/cm |
(79 d/cm) |
(79 d/cm) |
(79 d/cm) |
(79 d/cm) |
(79 d/cm) |
(79 d/cm) |
(79 d/cm) |
|
|
(79 d/cm) |
(79 d/cm) |
| Voeding |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Luchttoevoer |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Markeren over Buitendiameter |
|
|
|
|
|
Nee |
|
|
|
This page uses coding that is only viewable with Netscape and Microsoft
Explorer versions 3.0 or higher.
For best results print this page in Landscape Mode. This can be found within
the print setup of your browser.